 |
| SPECIFICATION |
| Ingredients |
: |
Mixture of Hydrocarbons & cationic solvents |
 |
| Auto Ignition Temperature |
: |
190 -195 degree centigrade |
| Clarity |
: |
Hazy |
| Viscosity |
: |
1900 – 2100cps |
| Tack Time |
: |
40 – 60 Minutes |
| Typical Specific Gravity |
: |
0.83 – 0.85 |
| Flammability |
: |
Highly inflammable |
| Packing |
: |
25 Liters |
|
| CHARACTERISTICS OF THE PRODUCTS : |
| This product SR 8585 TF is designed for footwear industry and it is widely use in the sole attachment for bonding leather, synthetic upper, banwar, microsole, nitrile sole, texon board etc. This adhesive is free from Benzene Toluene and halogeneted hydrocarbon ( Trichloroethylene, Dichloroethylene) etc. It is composed of primarily mixture of acrylic and ketonic solvents. |
|
| |
| INSTRUCTION FOR APPLICATION : |
| Make sure that the surface to be bonded should be clean, dry and free from grease/oil. Uniform coat of adhesive is to be applied on both the surface to be joined. Porous substrates like leather may require double coats for superior bonding. Allow 8-10 minutes for solvent evaporation. Place the coated surface one above the other while the adhesive remains sticky. Press the surface firmly together. Final strength is to be achieved after 24 hrs. |
| |
| RECOMMENDED FOR USE : |
The Containers should be tightly packed so as to keep airtight.
The products should be stirred properly before its application. |
| |
| STORAGE CONDITION : |
| The adhesive containers should be kept in a shed so as to avoid direct sunlight. The temperature of a covered placed should be maintained between 10°C to 40°C. These products should be stored in a flame proof area. |
|
 |
|
| |
| Note: We hereby intimate that before applying our product in full length of production,the customer is instructed to test in his own way to determine the suitability of the products for his specific use under his operating conditions. As the circumstances under which our products are stored,handled and used,are beyond our control on account of which we cannot assume any responsibility for their use by the customer. |
|
 |
|
