 |
| SPECIFICATION |
| Ingredients |
: |
Mixture of Hydrocarbons & Petroleum Ether. |
 |
| Auto Ignition Temperature |
: |
185-190 degree centigrade |
| Clarity |
: |
Hazy |
| Viscosity |
: |
1800 – 2000cps |
| Tack Time |
: |
20 – 30 Minutes |
| Typical Specific Gravity |
: |
0.83 – 0.85 |
| Flammability |
: |
Highly inflammable |
| Packing |
: |
25 Liters |
|
| CHARACTERISTICS OF THE PRODUCTS : |
| This is a synthetic rubber based adhesive formulated with synthetic resins other hydrocarbon solvents. This adhesive posses outstanding strength along with high peel value which is in great demand in shoe industries, automotive industries, furniture’s and in versatile industries like upholstery segments i.e. Sofas, mattresses and in plywood industry. It is also used in the bonding of PVC floor tiles, rubber and in the adhesion of fiber to plywood metals.This product SR 6565 F grade exhibits good bond strength and is recommended in the Closing in footwear industries. |
|
| |
| INSTRUCTION FOR APPLICATION : |
| Surface of the bonded product should be cleaned and free of dust, grease or moisture. Care should be taken while using porous surface like boards where adhesive is absorbed leaving a non tacky surface. Application of adhesive can be done via brush or pressing tools. Polystick SR 6565F can be used in upper lining, counters and quarters. The used of right adhesive for the manufacturing of footwear ensures its quality. This is a multipurpose adhesive used for leather bonding. Bonding at the right time and the heavy pressure on both the surface after application provides a best adhesion |
| |
| RECOMMENDED FOR USE : |
The Containers should be tightly packed so as to keep airtight.
The products should be stirred properly before its application. |
| |
| STORAGE CONDITION : |
| The adhesive containers should be kept in a shed so as to avoid direct sunlight. The temperature of a covered placed should be maintained between 10°C to 40°C. These products should be stored in a flame proof area. |
|
 |
|
| |
| Note: We hereby intimate that before applying our product in full length of production,the customer is instructed to test in his own way to determine the suitability of the products for his specific use under his operating conditions. As the circumstances under which our products are stored,handled and used,are beyond our control on account of which we cannot assume any responsibility for their use by the customer. |
|
 |
|
