 |
| SPECIFICATION |
| Ingredients |
: |
Mixture of Hydrocarbons & Petroleum solvent |
 |
| Auto Ignition Temperature |
: |
190-195 degree centigrade |
| Clarity |
: |
Hazy |
| Viscosity |
: |
1200 – 1400cps |
| Tack Time |
: |
40 – 60 Minutes |
| Typical Specific Gravity |
: |
0.82 – 0.85 |
| Flammability |
: |
Highly inflammable |
| Packing |
: |
500 ml, 1 Ltr,5 Ltr. 25 Ltr. |
|
| CHARACTERISTICS OF THE PRODUCTS : |
POLYSTICK SR 6565 is a synthetic rubber based adhesive consisting of polychloroprene rubber and resins immersed in a solvent like ethyl acetate, Toluene, petroleum spirits & other solvent having a voracity characteristics.
POLYSTICK SR 6565 adhesives is coiled employed in the footwear industry in building & in the do it yourself market.
This product SR 6565 grade exhibits good bond strength and is recommended in the Closing in footwear industries.
This adhesive is used in the automotive industry for bonding rubber weather ship. This adhesive has a versatile use in the manufacturing of industrial & consumer range of products. This adhesive is best in places where quick smooth application is requested. |
|
| |
| INSTRUCTION FOR APPLICATION : |
| Surface of the bonded product should be cleaned and free of dust, grease or moisture. Care should be taken while using porous surface like boards where adhesive is absorbed leaving a non tacky surface. Application of adhesive can be done via brush or pressing tools. Bonding at the right time and the heavy pressure on both the surface after application provides a best adhesion . |
| |
| RECOMMENDED FOR USE : |
The Containers should be tightly packed so as to keep airtight.
The products should be stirred properly before its application. |
| |
| STORAGE CONDITION : |
| The adhesive containers should be kept in a shed so as to avoid direct sunlight. The temperature of a covered placed should be maintained between 100C to 400C. These products should be stored in a flame proof area. |
|
 |
|
| |
| Note: We hereby intimate that before applying our product in full length of production,the customer is instructed to test in his own way to determine the suitability of the products for his specific use under his operating conditions. As the circumstances under which our products are stored,handled and used,are beyond our control on account of which we cannot assume any responsibility for their use by the customer. |
|
 |
|
